Failures in Knit Fabrics – Simplicity 1916 and Simplicity 1197

Failures in Knit Fabrics – Simplicity 1916 and Simplicity 1197

This post may contain affiliate links. This means that if you click through and make a purchase from these links, I may earn a small commission at no extra cost to you.

In my post about the Double Down Day Dress, I allude to failures of the past. Here is that story.

I learned to sew with woven, non-stretch fabric. I always thought that knits were this crazy complicated thing, and I was better off just buying my t-shirts and camis. My first attempt at a knit top seemed to support this theory.

I found a fantastic knit fabric in multicoloured patterned stripes, and decided to try. I chose Simplicity 1916, view C. Since this was a few years ago, well before starting this blog, I don’t remember all of my trials and tribulations, but I do remember my zigzag stitch not behaving, and the front cross piece coming out all sorts of misshapen. I was very frustrated because I thought I was being super careful about not stretching anything and I had no idea what I was doing wrong. That project ended up in the bin, and unfortunately, I have no pictures to share.

I had some of the stripe fabric left over, and, for reasons unknown, I decided to try and make a dress out of knit fabric, using a pattern for woven fabric, Simplicity 1197. I used the stripe knit for the neck and front panel, and a black jersey for the contrast. Since I had no idea how to work with knit fabric, I tried to deal with it like you would a woven. To make it behave, I used interfacing on the curves and corners, and to stabilize the zip. I left off the sleeves and bound the armholes with bias binding. To hem it, I did a rolled hem, which was quite unsuccessful.

Despite all this, I have actually worn this dress a lot! It is my go-to dress for salsa dancing. It fits well, is comfy, and looks decent, as long as you don’t look too closely at the armholes, neckline, zip or hem…! I would like to remake this dress at some point, using the lessons I’ve learned about working with knits. Having now successfully made a knit garment, using a pattern intended for knit fabric, I now know what alterations I’d need to make for that non-knit pattern to work with knit fabric.

My biggest lesson from this experience is to not give up. There were a solid few years after this debacle where I didn’t touch knits at all and swore I never would again! But I saw my best friend making all sorts of things out of knit fabrics, and she inspired me to try again, with the Double Down. I’m so glad I did! I now have a whole new realm to explore!

What failures have you had, and how have you learned from them? Let me know in the comments!

Front view.
The very unorthodox inner workings…!
The armhole binding has come apart, and it looks like I might have used interfacing here as well. I can’t remember exactly, but clearly it didn’t work!
The rolled hem does not stretch, which means that the thread snapped in multiple places after a few wearings. I now know that I can just fold it up once and sew with a stretch stitch.
Like, pin and share!


34 thoughts on “Failures in Knit Fabrics – Simplicity 1916 and Simplicity 1197”

Leave a Reply

Your email address will not be published. Required fields are marked *